Two-Hand Control Center PCB3®
The Control requires at least a synchronous action by both hands to release and maintain the operation of a machine or machine elements as long as there are dangerous situations, assuring in this way only the protection of this operator.
Description PCB3®
- Smelted-aluminum cover-part with a protection lid over each pushbutton.
- Available with reserved holes for additional pushbuttons of Ø22.5 mm.
- Delivered with an Ø20 mm ergonomic head tube made of polished stainless steel to facilitate the operation of the buttons from different positions.
- Bottom base cast aluminum with central opening of 200×90 mm for cables entries.
- Prepared to be mounted directly on adjustable metal foot PRB05.
- 2 mm thickness rubber sealing between base and cover to protect the terminals against dust, oil and water.
- IP65 protection with supplied pushbuttons.
- Weight: 5Kg.
- Standard paint Gray RAL 7038 (other versions upon request)
Push Buttons
- Two-hand control– Two black pushbuttons Ø60 mm (mushroom type) with contact block (1NO + 1NC).
- Emergency Stop device– One red pushbutton Ø40 mm (mushroom type) with blocking device, push-turn for unlocking, contact block (2NC), delivered with Ø60 mm Emergency Stop label, yellow and English black letters (others languages under request).
- Manufactures– Rockwell, (others manufactures under request).
- 4 PVC blockages, black color and Ø22,5 mm with reserved holes option
Metal foot with adjustable height PRB05, for PCB3® installation
Description of PRB05
- Two telescopic tubes of Ø55 and Ø60 mm with a lever to fix the selected height angle and turn position.
- Two cable entries at bottom side and an Ø48 mm PVC cone at the top to retain the cables.
- A plate of 200x90x3 mm on top side prepared to assemble the PCB3®, and lever for the inclination adjustment.
- A robust and stable base plate with two Ø10.5 mm holes to fix the metal foot on the floor.
- The PRB05 base plate is prepared to accept two foot control unit.
- Steel made.
- Standard paint Gray RAL 7038 textured (other versions upon request)
- Weight: 9.2 Kg
Special Applications
- Special Painted.
- Special heights.
- Assembled additional pushbuttons, as switches, signaling lamps, selectors, etc.
- Safety foot control mounted.
- Units pre-wired.
- Labels with texts in different languages, for example in emergency stop.
Duelco Zero Force Touch Two Hand Control Station
The TST-4 is ergonomically designed to eliminate the hand, wrist, and arm stresses associated with mechanical push buttons. They require absolutely no physical pressure to operate. LED indicators light for “power on” and “output activated”. Typical mechanical push buttons require 2lbs of pressure to actuate which could amount to 2 tons per day based on 1000 actuations. Compatible Two Hand Anti Tie Down Safety Relay HR-2007, as well as other mfrs
Features & Specifications:
- Adjustable Pedestal
- Zero Force Sensor
- Power Supply- 24VDC
- Contact Load – 100mA
- Continuous Signal when activated
- Reverse Polarity Protected
- PhotoMOS-Relay NC/NO)
- Meets EN-60204-1
- Works with Gloves
- Dual LED’s
Hand Sensor Actuator
The Duelco hand sensor actuator is an obvious choice – especially with a high activation frequency
User advantages
- Ergonomic
- Low activation force
- Reduces the possibility of injuries
- Increases the productivity
- On/Off indication via LEDs
- Outputs are NO/NC contacts